Modeling and analysis for multilayered complex communication network of satellite navigation system

This study is extended to construct the network model, the node model, and the link model of complex communication network for satellite navigation system (CCN‐SNS) based on the hierarchical architecture. Firstly, a method called snapshots was proposed to describe the dynamic topology for CCN‐SNS; secondly, another method was put forward to model the different nodes of the CCN‐SNS; thirdly, the different links between every two different nodes were modeled. Therefore, based on the OPNET tools, a simulation for the CCN‐SNS, which contains the models that proposed earlier used to analyze the navigation accuracy and network transmission performance, was performed.     

A matting method based on full feature coverage

Multimedia Tools and Applications - The sampling-based matting method is an important method for image matting. There are three key techniques in sampling-based matting: 1) how to build a...     

一种X煤在首钢的应用实践

针对当前优质炼焦煤资源越来越少，而高炉生产对焦炭质量指标要求越来越高的情况下，对具有低灰、高硫特点的X煤进行了系统的炼焦试验研究。结果发现，在炼焦生产中合理配加5%～8%的X煤不会造成焦炭硫分升高的不利影响，焦炭灰分下降明显，强度保持稳定。该研究成果成功应用于首钢炼焦生产，焦炭各项指标均达标，这不仅扩大了炼焦煤的使用范围，而且在资源使用方面为公司焦炭灰分的降低提供了支持。     

Compilation of Modern Technologies To Map Genome-Wide Cytosine Modifications in DNA

Over the past few decades, various DNA modification detection methods have been developed; many of the high-resolution methods are based on bisulfite treatment, which leads to DNA degradation, to a degree. Thus, novel bisulfite-free approaches have been developed in recent years and shown to be useful for epigenome analysis in otherwise difficult-to-handle, but important, DNA samples, such as hmC-seal and hmC-CATCH. Herein, an overview of advances in the development of epigenome sequencing methods for these important DNA modifications is provided.     

Investigation on low-temperature sintered AlN nanoceramics with high thermal conductivity

The aim of this research was to investigate the effect of sintering additive and relatively low-sintering temperature on the thermal conductivity of aluminum nitride nanoceramic. While using nanosized AlN powder and liquid-phase sintering additives, the various sintering processes were performed at temperatures 1400 and 1500°C for several hours. In the analysis methods, thermal conductivity (K) and thermal diffusivity (α) were measured using thermal conductivity analyzer (Hot Disk), scanning electron microscope (SEM) was used to observe the surface morphology of the microstructure, x-ray diffraction analyzer (XRD) to analyze the grain size and crystal structure, Raman spectroscopy (Raman) emission spectrum was analyzed to identify the material microstructure and the densities of AlN specimens were measured by Archimedes method. It was found that the thermal conductivity is related to the densification of nanosize low-temperature sintered material, which can be controlled by additives and sintering temperature. With Y₂O₃ sintering add, the densification of AlN for low-temperature sintering increased by the factor of ～5% to ～12%, and the thermal conductivity was enhanced by 25%. The relative density observed in this research is about 78%-84%, and the thermal conductivity measured is in the range of 9-14 W/mK.     

基于XML的信息物理融合系统组件建模与仿真

信息物理融合系统（CPS）涉及多种计算模型的集成和协同工作，针对CPS设计方法不统一、重塑性差、复杂度高、难以协同建模验证等问题，提出一种结构化、可描述行为的异元组件模型。首先，用统一组件建模方法进行建模，解决模型不开放问题；然后，用可扩展标记语言（XML）规范描述各类组件，解决不同计算模型描述语言不一致和不可扩展问题；最后，用多级开放组件模型的协同仿真验证方式进行仿真验证，解决验证的不可协同问题。通过通用组件建模方法、XML组件规范描述语言以及验证工具平台XModel对医用恒温箱进行了建模、描述和仿真。医用恒温箱的案例表明，这种模型驱动建立可重塑异元组件并确认其设计正确性的过程，支持信息物理协同设计和边构建边纠正，可避免在系统实现过程中发现问题时再进行反复修改。     

Zinc ferrite based gas sensors: A review

Flammable, explosive and toxic gases, such as hydrogen, hydrogen sulfide and volatile organic compounds vapor, are major threats to the ecological environment safety and human health. Among the available technologies, gas sensing is a vital component, and has been widely studied in literature for early detection and warning. As a metal oxide semiconductor, zinc ferrite (ZnFe₂O₄) represents a kind of promising gas sensing material with a spinel structure, which also shows a fine gas sensing performance to reducing gases. Due to its great potentials and widespread applications, this article is intended to provide a review on the latest development in zinc ferrite based gas sensors. We first discuss the general gas sensing mechanism of ZnFe₂O₄ sensor. This is followed by a review of the recent progress about zinc ferrite based gas sensors from several aspects: different micro-morphology, element doping and heterostructure materials. In the end, we propose that combining ZnFe₂O₄ which provides unique microstructure (such as the multi-layer porous shells hollow structure), with the semiconductors such as graphene, which provide excellent physical properties. It is expected that the mentioned composites contribute to improving selectivity, long-term stability, and other sensing performance of sensors at room or low temperature.     

Dual pH‐ and thermal‐responsive nanocomposite hydrogels for controllable delivery of hydrophobic drug baicalein

Hydrogels have been widely used as mild biomaterials due to their bio‐affinity, high drug loading capability and controllable release profiles. However, hydrogel‐based carriers are greatly limited for the delivery of hydrophobic payloads due to the lack of hydrophobic binding sites. Herein, nano‐liposome micelles were embedded in semi‐interpenetrating poly[(N‐isopropylacrylamide)‐co‐chitosan] (PNIPAAm‐co‐CS) and poly[(N‐isopropylacrylamide)‐co‐(sodium alginate)] (PNIPAAm‐co‐SA) hydrogels which were responsive to both temperature and pH, thereby establishing tunable nanocomposite hydrogel delivery systems. Nano‐micelles formed via the self‐assembly of phospholipid could serve as the link between hydrophobic drug and hydrophilic hydrogel due to their special amphiphilic structure. The results of transmission and scanning electron microscopies and infrared spectroscopy showed that the porous hydrogels were successfully fabricated and the liposomes encapsulated with baicalein could be well contained in the network. In addition, the experimental results of response release in vitro revealed that the smart hydrogels showed different degree of sensitiveness under different pH and temperature stimuli. The results of the study demonstrate that combining PNIPAAm‐co‐SA and PNIPAAm‐co‐CS hydrogels with liposomes encapsulated with hydrophobic drugs is a feasible method for hydrophobic drug delivery and have potential application prospects in the medical field. © 2018 Society of Chemical Industry